Basic Info.
Sensor
Microwave Motion Sensitive
Product Description
Product Name: UV Sterilizing Lamp
Item NO.: ZY-USL-36W
Rated Power: 36W
Rated Voltage: 220V
Rated Frequency: 50Hz
Sterilizing Factor: Ultraviolet light 254nm
Effective Area: 10 - 40 M2
Timer Method: Remote control
Timing Induction Mode: Microwave
Remote control mode:30M wireless remote control
Executive standard: GB19258-2012
Instructions
1, Contact lamp to power, the default setting of lamp isstandby mode, the red indicator above the
ON/OFF button will flash; The buzzer willsound "didi"indicating that it is paired with the remote
control , after the pairing is successful, the red indicator is always on to enterstandby mode.
2, Automatic mode: On the control panel,short press ON / OFF to enter automatic mode (same function
as pressing the remote control key in standby mode), the red indicator on the top flashes quickly, and
the buzzersounds"didi", after 10S the lamp startsto work, the UV tube lights up, entersthe
automatic operation mode, the red indicator turns off. In the automatic mode, the lamp will
automatically end after 45 minutes of continuous work. The red indicator light is always on.
When the automatic mode is running, if need to stop the work, press any key on the control panel to
stop the UV lamp work.
3, Timing mode:short press 15MIN / 30MIN / 60MIN button on the control panel or remote control, the
yellow indicator above the timer key on the control panel flashes quickly, the red indicator above the
ON / OFF key is always on, and the buzzersounds" didi"for 10 seconds, the lamp startsto work; the
lamp will automatically end work after 15 minutes/ 30 minutes/ 60 minutes, at the end,the buzzer will
emit a "di" and the red indicator light is always on.
When the timer mode is running, if you need to stop the work, press any button on the control panel
to stop the UV lamp work.
4, Human body induction: No matter which mode the lamp works in, when a person or pet approaches,
the built-in sensor of the lamp willsense it, the buzzer willsound " didi", and then the lamp willstop
working automatically. In order to prevent people or animalsfrom being burned by ultraviolet rays,
the light will restart 45 seconds after the person or animal leaves; in the timekeeping mode due to the
induction interruption, the light will continue to work after the person or animal leaves until the end
of the set time.(see pic. 2)
5, The included remote control has the same control functions asthe control panel, and the maximum
wireless wall penetration distance is 30 meters.Notes:1. Don't look directly at the UV tube, it can be used without people, animals or plants around because UV ray can cause skin burns, eye conjunctiva irritation and plants cell wall break and wither.
2. Room should keep clean and dry when lamp is working; If the temperature is below 20ºC or above 40ºC, the sterilizing time should extend 15~30 minutes.
3. When disinfecting the surface of the object with UV rays, the surface of object to be irradiated should be directly irradiated within 1 meter of UV rays, the effect is better.
4. Please move out or cover the treasured collections or plants with fabric if they are in the sterilizing room.
Q & A
Q: The principle of UV sterilization?
A: Ultraviolet C-band irradiates microorganisms and destroys the DNA
(deoxyribonucleic acid) and RNA (ribonucleic acid) of various bacteria, viruses, and
microorganisms, causing bacteria, viruses, and microorganisms to lose their viability
and reproductive power to achieve the effect of disinfection.
Q: The applicable places of UV sterilizing lamp?
A: Applicable for indoor occasions of 30-40 square meters, such as
hospitals,classrooms, enterprises and institutions, this lamp is more suitable for
household disinfection, such as kitchens, toilets or other places that are prone to
breed bacteria and viruses.
Q: What should be paid attention to UV disinfection?
A: Please Attention! After UV disinfection, open the window for 20-30 minutes before
entering the room
Q: Can this lamp be used to sterilize quilt?
A: Yes, the UV ray emitted by this lamp is equivalent to the sun's rays. If it rains
frequently or there is no outdoor drying condition, it can be used, but please be
careful not to expose it to organic fabrics such as silk for more than 120 minutes,
may cause discoloration.
Q: How often to use the lamp?
A: Usually 1~2 times per week.
Q: How long can the UV tube work? How about warranty?
A: Working hours of the UV tube is 8000 hours. This lamp is covered by one- year
warranty(man-made damage is not included).
Q: Will there occasional foreign matters in the tube affect it work?
A: The small white granules that are sometimes seen in the UV tube are mercury
particles. Due to the working principle of this UV lamp, mercury vapor in the lamp
tube is excited to emit light. There may be a small amount of particle deposition in
the tube, which is normal and does not affect the use of the lamp.
Address:
3f, , Xingguang Park, Shihuanroad, Shiyan, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Light Industry & Daily Use, Lights & Lighting
Management System Certification:
ISO 9001
Company Introduction:
Nobile Lighting Co., Ltd. Built in 2011. Is a company focusing on designing, manufacturing and selling LED illumination SKD and finished products. We have molding department, hardware department, Module light source department, assembling department, QC, R& D department.
We produce strictly apply to ISO9003 standard. Our products had been sold all over the world and highly recognized by the customers.
The company foundation is honest operation, and the principal is customer oriented, we focus on producing high quality products, and provide customers with high value adding. The goal of the company is aiming at creating value for customers, focusing on new products design, dedicate in LED illumination market, and finally achieving Win-Win with all our customers.